Tag Archives: G42

More Grip for the G42

v5In my previous post reviewing the Glock 42, I mentioned one of the minor drawbacks of the handgun, and a drawback of all subcompact handguns, being that the grip was too short to get your entire hand around.  Even with the tiny hands this gun was meant to fill, you’re left with a pinky hanging off.  Most smaller handguns come with, or at least have an option for, a magazine with an extended floor plate to give you that extra bit, the Walther P22 and Beretta Pico, for instance, come with both types of magazines.

v7While Glock currently offers an extension for sale, it’s not quite as, well, aesthetically pleasing, as a set I found on Glockmeister (where you may remember me finding the parts needed to complete my Glock 19 brass-to-face fix).

v1Enter the Vickers Tactical (produced by Tango Down) Glock 42 floor plates.  These give just enough extra to get your last finger on there, without adding too much to the dimensions of the gun.  The taper was a great touch, adding just a bit of functional flair, without looking too out of place.

v3 v8Until there’s an available +1 or +2 floorplate to get that capacity up to something respectable, these will be a fine addition.

v6They’re also easy to install (despite the “Gunsmith Only” warning on the package).  Without going into too much detail here, simply use your Glock Armorer’s Tool to push in the tab on the bottom of the magazine, go in all the way to the handle of the tool, squeeze on either side of the magazine and pry forward with the tool.  Once it starts sliding off, remove the tool, block the bottom with your thumb (or the spring will come flying out) and slide the old floor plate off.  Slide new plate on until it clicks into place, done.  If there’s a request, I’ll do a follow up on how to do this with picture, or a video.

v4So that’s it, for the record, addition of these removes one (-) from the Glock 42 scorecard.

Glock 42 Review

IMG_0759

Well, let me first say, I hope everyone had a good Holiday season.  It’s been a busy few weeks for me, but we did at least get a chance to get to the range and break in one of my significant other’s Christmas gifts.

Enter the Glock 42.  I know this thing’s been out for a bit of time now and a review on another .380, the Beretta Nano, would probably be a bit more useful to early adopters, but I also know that before purchase, I scoured for reviews on this thing, and every point of data counts.

Shooter1

Right onto it: Why the Glock 42?  Anybody who personally knows the end user in mind here will know that she has tiny hands.  TINY.  She also has really taken a liking to Glock handguns since being introduced to them- the light weight, the balance, the easy controls, the easy-to-use sights, everything combined to let her shoot more accurately (mostly due to genuinely enjoying practicing with it) than nearly anything else we own aside from a tricked out Kimber Custom Target II.  The problem is, Glocks are fat.  Her shooting was decent, despite not quite being able to get a proper grip on any Glock she’d tried due to the size.  So short of radius-ing the hell out of the grip and hoping to make it a low enough diameter to get her hands around, she’d always end up with sub-standard grouping because of having to reach for the trigger or a bruised right thumb joint from improper grip.  The Glock 42 solved these problems, for the most part.

IMG_0760

First of, it’s tiny, not quite Colt Mustang Pocketlite / Ruger LCP / Beretta Pico tiny, but compared to most subcompacts, this thing is quite the mouse gun.  More importantly, it’s slim, especially for a Glock.  This allows shooters who might be hand-size challenged to get a proper grip on the thing, which is exactly what we were going for here.  Now, there are positives and negatives to this- while it fit her tiny hands perfectly, it still has the same sub-compact issue of length of grip, even her pinky hangs of slightly.  This is easily remedied, however.  The other thing I noticed, was with a proper thumbs-forward grip, this thing sunk so much into my paws that I had to make a conscious effort to not hold the slide release down.  This wasn’t an issue, however, when shooting one handed with either strong or weak hand, and this thing was a pleasure to shoot one handed- this would be a great backup.

IMG_0744

As for functionality- pretty impressive.  It’s not *fully* broken in yet, as we’ve only put 200 rounds through it for our first test.  We used 100 rounds of Aguila 95gr. FMJ as our opener, and 100 rounds of cheapo Academy sourced Monarch 94gr. FMJ to see how low we could go with ammunition quality (while still sticking to factory loads).  In the 200 round breakin, we had a single FTF about 40-round into the down and dirty Monarch stuff, which had been notably weaker than the Aguila.  For a short .380, this thing grouped very well, right in line with other compact Glocks.  One minor nitpick, the 6-round magazines- it’s a tad difficult to get that last round in, as the .380s are short to the point that when loading, the round beneath tends to dip in the front rather than be pushed down, and it takes a bit of effort on that last one.  Due to the difference in Magazine here, the standard Glock speedloader (or SLINO if that’s your opinion on the thing) doesn’t work, and they don’t yet have one out for the 42.  But this is a practice/training issue more than anything.

IMG_0762 IMG_0763 IMG_0761

Mechanically, this thing is just standard Glock, but scaled down.  Not much to say here- disassembly is identical to any other Gen4 Glock.  A note on that- while the 42 uses Gen4 features, technically (at least per a Glock rep I spoke with) it’s a first gen, as this is a new gun.  Whatever… built with Gen4 features, I’m still going to refer to it as a Gen4.

The Scorecard:

+ Size/Dimensions (Great for an EDC)
+ Price (Typical Glock pricing, not LCP cheap, but quality for the $)
+ Manual of Arms (Same as other Glocks, know one, know all)
+ Accuracy (No sacrifice for size, typical Glock sights)
+ Comfort (Despite being as light as it is, very little recoil)
+ Reliability (Only 1 FTF on break-in, otherwise no issue)

– Magazine (6+1 Capacity, really?  Also mentioned loading issue)
– Size? (Might be a bit tiny for big hands without mag extensions)
– Price? (It’s not AS cheap as some other subcompact .380s)
– .380 (Some might complain about this not being a 9mm)
– Reliability issues with early models (not experienced on ours)

shooter2